Engine oil 5W40 4T 4 liters Motul synthetic 300V Factory Line Road Racing

SKU: MAT-7140525

108,10 €

27,03 € per 1 l

incl. 19% VAT , plus (Weltweit)

Choose tax zone / country of delivery

Currently out of stock

Motul 300V Factory Line Road Racing 5W-40

MOTUL 300V POWER is an all-season racing engine oil based on E technology with high HTHS viscosity. Developed for racing engines, which are used in a wide range of speeds and temperatures. In racing especially suitable for rally, GT and short distance racing.

SPECIFICATIONS/STANDARDS:

- STANDARDS: Exceeds existing motorsport standards
- USE: Rally, GT, short distance racing

ESTER Core TECHNOLOGY:

For several decades MOTUL has been developing high-performance engine oils based on synthetic esters.
The special selection of synthetic esters and combination with an innovative additive package form an exceptional synergy.
ESTER Core is the latest technological development stage and allows maximum power output of the engine without compromising reliability and wear.

ADVANTAGES

- Max. Oil film stability, optimum adhesion, high temperature resistance for optimum wear protection.
- Very good cold start properties. Even at very low temperatures optimal lubrication of the engine.
- Special friction modifiers allow a significant reduction of frictional resistance in the engine and a reduction in operating temperature.
- Very high pressure absorption capacity guarantees maximum lubrication reliability even in extreme temperature ranges.
- The ester base reduces the operating temperature up to 10 ° C in the upper ranges and has a very good adhesion to metallic surfaces.
- The low viscosity SAE 5W-40 allows a very fast oil film build-up, has a performance-enhancing effect.
- Minimal evaporation tendency, thereby low oil consumption.
- Extremely shear-resistant, stable oil pressure under all operating conditions.

Recommendations:

Because of the viscosity 5W-40 only a small entry of unburned fuel can be compensated.
Miscible with mineral and synthetic engine oils. For optimum engine performance, however, mixing with other
synthetic and mineral engine oils should be avoided. Oil change interval: according to the type of use and operating conditions.

Properties:

- Viscosity SAE J 300 5W-40
- Density at 20°C ASTM D 1298 0.860
- Viscosity at 100°C ASTM D 445 13.6 mm²/s
- Viscosity at 40°C ASTM D 445 81.8 mm²/s
- Viscosity index ASTM D 2270 174
- HTHS viscosity ASTM D 4741 4.1 mPa*s
- Pour point ASTM D 97 -45°C
- Flash point ASTM D 92 230°C
- TBN ASTM D 2896 8.25 mg KOH/g